dmesg - Stock Cooler
efi: EFI v2.40 by American Megatrends
efi: ACPI=0x87a84000 ACPI 2.0=0x87a84000 SMBIOS=0xf05e0 MPS=0xfc400
SMBIOS 2.8 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./E3V5 WS, BIOS P1.30 04/20/2016
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x276800 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 7FC0000000 uncachable
1 base 00A0000000 mask 7FE0000000 uncachable
2 base 0090000000 mask 7FF0000000 uncachable
3 base 008C000000 mask 7FFC000000 uncachable
4 base 008A000000 mask 7FFE000000 uncachable
5 base 0089000000 mask 7FFF000000 uncachable
6 base 0088800000 mask 7FFF800000 uncachable
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0x88000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fc640-0x000fc64f] mapped at [ffff8800000fc640]
Base memory trampoline at [ffff880000095000] 95000 size 24576
Using GB pages for direct mapping
BRK [0x1c343000, 0x1c343fff] PGTABLE
BRK [0x1c344000, 0x1c344fff] PGTABLE
BRK [0x1c345000, 0x1c345fff] PGTABLE
BRK [0x1c346000, 0x1c346fff] PGTABLE
BRK [0x1c347000, 0x1c347fff] PGTABLE
BRK [0x1c348000, 0x1c348fff] PGTABLE
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x0000000087A84000 000024 (v02 ALASKA)
ACPI: XSDT 0x0000000087A84098 0000B4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x0000000087AA4C30 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x0000000087A841E8 020A43 (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x0000000087AC2F80 000040
ACPI: APIC 0x0000000087AA4D40 0000BC (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x0000000087AA4E00 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x0000000087AA4E48 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x0000000087AA4EE8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x0000000087AA4F28 000038 (v01 ALASKA A M I 01072009 AMI. 0005000B)
ACPI: SSDT 0x0000000087AA4F60 00036D (v01 SataRe SataTabl 00001000 INTL 20120913)
ACPI: LPIT 0x0000000087AA52D0 000094 (v01 INTEL SKL 00000000 MSFT 0000005F)
ACPI: DBGP 0x0000000087AA5368 000034 (v01 INTEL 00000000 MSFT 0000005F)
ACPI: DBG2 0x0000000087AA53A0 000054 (v00 INTEL 00000000 MSFT 0000005F)
ACPI: SSDT 0x0000000087AA53F8 000609 (v02 INTEL xh_rvp08 00000000 INTL 20120913)
ACPI: AAFT 0x0000000087AA5A08 00029A (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: SSDT 0x0000000087AA5CA8 00525D (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
ACPI: UEFI 0x0000000087AAAF08 000042 (v01 00000000 00000000)
ACPI: SSDT 0x0000000087AAAF50 000E58 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
ACPI: BGRT 0x0000000087AABDA8 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: DMAR 0x0000000087AABDE0 000070 (v01 INTEL SKL 00000001 INTL 00000001)
ACPI: ASF! 0x0000000087AABE50 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000002767fffff]
NODE_DATA(0) allocated [mem 0x2767f9000-0x2767fafff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x00000002767fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x000000008203ffff]
node 0: [mem 0x000000008208b000-0x00000000820dcfff]
node 0: [mem 0x00000000827ad000-0x0000000086f79fff]
node 0: [mem 0x00000000872af000-0x000000008746dfff]
node 0: [mem 0x0000000087fff000-0x0000000087ffffff]
node 0: [mem 0x0000000100000000-0x00000002767fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x00000002767fffff]
On node 0 totalpages: 2085309
DMA zone: 64 pages used for memmap
DMA zone: 28 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 8553 pages used for memmap
DMA32 zone: 547359 pages, LIFO batch:31
Normal zone: 23968 pages used for memmap
Normal zone: 1533952 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
e820: [mem 0x88100000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 32 pages/cpu @ffff880276400000 s91160 r8192 d31720 u262144
pcpu-alloc: s91160 r8192 d31720 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 2052696
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 8035492K/8341236K available (9857K kernel code, 1421K rwdata, 4216K rodata, 1096K init, 776K bss, 305744K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
CONFIG_RCU_FANOUT set to non-default value of 32
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:16640 nr_irqs:2048 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
console [ttyS0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
tsc: PIT calibration matches HPET. 2 loops
tsc: Detected 2903.922 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5807.84 BogoMIPS (lpj=2903922)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160108
ACPI Error: [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20160108/dswload-210)
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20160108/psobject-227)
ACPI Exception: AE_NOT_FOUND, (SSDT:xh_rvp08) while loading table (20160108/tbxfload-193)
ACPI Error: 1 table load failures, 4 successful (20160108/tbxfload-215)
Security Framework initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 10 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 36K (ffffffff9c277000 - ffffffff9c280000)
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x1
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x00000087029000 end: 0x00000087048fff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
DMAR-IR: HPET id 0 under DRHD base 0xfed90000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1260L v5 @ 2.90GHz (family: 0x6, model: 0x5e, stepping: 0x3)
calling trace_init_flags_sys_exit+0x0/0xf @ 1
initcall trace_init_flags_sys_exit+0x0/0xf returned 0 after 0 usecs
calling trace_init_flags_sys_enter+0x0/0xf @ 1
initcall trace_init_flags_sys_enter+0x0/0xf returned 0 after 0 usecs
calling set_real_mode_permissions+0x0/0x99 @ 1
initcall set_real_mode_permissions+0x0/0x99 returned 0 after 0 usecs
calling trace_init_perf_perm_irq_work_exit+0x0/0x13 @ 1
initcall trace_init_perf_perm_irq_work_exit+0x0/0x13 returned 0 after 0 usecs
calling init_hw_perf_events+0x0/0x516 @ 1
Performance Events: PEBS fmt3+, 32-deep LBR, Skylake events, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
initcall init_hw_perf_events+0x0/0x516 returned 0 after 0 usecs
calling register_trigger_all_cpu_backtrace+0x0/0x16 @ 1
initcall register_trigger_all_cpu_backtrace+0x0/0x16 returned 0 after 0 usecs
calling early_efi_map_fb+0x0/0x38 @ 1
initcall early_efi_map_fb+0x0/0x38 returned 0 after 0 usecs
calling spawn_ksoftirqd+0x0/0x2d @ 1
initcall spawn_ksoftirqd+0x0/0x2d returned 0 after 0 usecs
calling init_workqueues+0x0/0x3aa @ 1
initcall init_workqueues+0x0/0x3aa returned 0 after 0 usecs
calling migration_init+0x0/0x69 @ 1
initcall migration_init+0x0/0x69 returned 0 after 0 usecs
calling check_cpu_stall_init+0x0/0x1b @ 1
initcall check_cpu_stall_init+0x0/0x1b returned 0 after 0 usecs
calling rcu_register_oom_notifier+0x0/0x14 @ 1
initcall rcu_register_oom_notifier+0x0/0x14 returned 0 after 0 usecs
calling rcu_spawn_gp_kthread+0x0/0x133 @ 1
initcall rcu_spawn_gp_kthread+0x0/0x133 returned 0 after 0 usecs
calling cpu_stop_init+0x0/0x9b @ 1
initcall cpu_stop_init+0x0/0x9b returned 0 after 0 usecs
calling relay_init+0x0/0x14 @ 1
initcall relay_init+0x0/0x14 returned 0 after 0 usecs
calling init_events+0x0/0x61 @ 1
initcall init_events+0x0/0x61 returned 0 after 0 usecs
calling init_trace_printk+0x0/0x12 @ 1
initcall init_trace_printk+0x0/0x12 returned 0 after 0 usecs
calling event_trace_enable_again+0x0/0x57 @ 1
initcall event_trace_enable_again+0x0/0x57 returned 0 after 0 usecs
calling dynamic_debug_init+0x0/0x265 @ 1
initcall dynamic_debug_init+0x0/0x265 returned 0 after 0 usecs
calling rand_initialize+0x0/0x30 @ 1
initcall rand_initialize+0x0/0x30 returned 0 after 0 usecs
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
Skipped synchronization checks as TSC is reliable.
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (46462.75 BogoMIPS)
devtmpfs: initialized
calling ipc_ns_init+0x0/0x48 @ 1
initcall ipc_ns_init+0x0/0x48 returned 0 after 0 usecs
calling init_mmap_min_addr+0x0/0x16 @ 1
initcall init_mmap_min_addr+0x0/0x16 returned 0 after 0 usecs
calling init_cpufreq_transition_notifier_list+0x0/0x1b @ 1
initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after 0 usecs
calling net_ns_init+0x0/0x135 @ 1
initcall net_ns_init+0x0/0x135 returned 0 after 0 usecs
calling e820_mark_nvs_memory+0x0/0x3b @ 1
initcall e820_mark_nvs_memory+0x0/0x3b returned 0 after 0 usecs
calling cpufreq_tsc+0x0/0x33 @ 1
initcall cpufreq_tsc+0x0/0x33 returned 0 after 0 usecs
calling init_cpu_syscore+0x0/0x14 @ 1
initcall init_cpu_syscore+0x0/0x14 returned 0 after 0 usecs
calling reboot_init+0x0/0x37 @ 1
initcall reboot_init+0x0/0x37 returned 0 after 0 usecs
calling init_lapic_sysfs+0x0/0x23 @ 1
initcall init_lapic_sysfs+0x0/0x23 returned 0 after 0 usecs
calling wq_sysfs_init+0x0/0x2b @ 1
initcall wq_sysfs_init+0x0/0x2b returned 0 after 0 usecs
calling ksysfs_init+0x0/0x93 @ 1
initcall ksysfs_init+0x0/0x93 returned 0 after 0 usecs
calling pm_init+0x0/0x5a @ 1
initcall pm_init+0x0/0x5a returned 0 after 0 usecs
calling init_jiffies_clocksource+0x0/0x19 @ 1
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
initcall init_jiffies_clocksource+0x0/0x19 returned 0 after 0 usecs
calling cgroup_wq_init+0x0/0x54 @ 1
initcall cgroup_wq_init+0x0/0x54 returned 0 after 0 usecs
calling init_wakeup_tracer+0x0/0x32 @ 1
initcall init_wakeup_tracer+0x0/0x32 returned 0 after 0 usecs
calling init_zero_pfn+0x0/0x39 @ 1
initcall init_zero_pfn+0x0/0x39 returned 0 after 0 usecs
calling fsnotify_init+0x0/0x24 @ 1
initcall fsnotify_init+0x0/0x24 returned 0 after 0 usecs
calling filelock_init+0x0/0x9f @ 1
initcall filelock_init+0x0/0x9f returned 0 after 0 usecs
calling init_misc_binfmt+0x0/0x2d @ 1
initcall init_misc_binfmt+0x0/0x2d returned 0 after 0 usecs
calling init_script_binfmt+0x0/0x16 @ 1
initcall init_script_binfmt+0x0/0x16 returned 0 after 0 usecs
calling init_elf_binfmt+0x0/0x16 @ 1
initcall init_elf_binfmt+0x0/0x16 returned 0 after 0 usecs
calling init_compat_elf_binfmt+0x0/0x16 @ 1
initcall init_compat_elf_binfmt+0x0/0x16 returned 0 after 0 usecs
calling debugfs_init+0x0/0x59 @ 1
initcall debugfs_init+0x0/0x59 returned 0 after 0 usecs
calling tracefs_init+0x0/0x3b @ 1
initcall tracefs_init+0x0/0x3b returned 0 after 0 usecs
calling securityfs_init+0x0/0x50 @ 1
initcall securityfs_init+0x0/0x50 returned 0 after 0 usecs
calling calibrate_xor_blocks+0x0/0x141 @ 1
xor: automatically using best checksumming function:
avx : 39392.000 MB/sec
initcall calibrate_xor_blocks+0x0/0x141 returned 0 after 9765 usecs
calling prandom_init+0x0/0xcc @ 1
initcall prandom_init+0x0/0xcc returned 0 after 0 usecs
calling pinctrl_init+0x0/0xae @ 1
pinctrl core: initialized pinctrl subsystem
initcall pinctrl_init+0x0/0xae returned 0 after 0 usecs
calling virtio_init+0x0/0x30 @ 1
initcall virtio_init+0x0/0x30 returned 0 after 0 usecs
calling iommu_init+0x0/0x56 @ 1
initcall iommu_init+0x0/0x56 returned 0 after 0 usecs
calling cpufreq_core_init+0x0/0x4c @ 1
initcall cpufreq_core_init+0x0/0x4c returned 0 after 0 usecs
calling cpuidle_init+0x0/0x3b @ 1
initcall cpuidle_init+0x0/0x3b returned 0 after 0 usecs
calling sock_init+0x0/0x8f @ 1
initcall sock_init+0x0/0x8f returned 0 after 0 usecs
calling net_inuse_init+0x0/0x24 @ 1
initcall net_inuse_init+0x0/0x24 returned 0 after 0 usecs
calling netlink_proto_init+0x0/0x157 @ 1
NET: Registered protocol family 16
initcall netlink_proto_init+0x0/0x157 returned 0 after 0 usecs
calling bdi_class_init+0x0/0x49 @ 1
initcall bdi_class_init+0x0/0x49 returned 0 after 0 usecs
calling mm_sysfs_init+0x0/0x29 @ 1
initcall mm_sysfs_init+0x0/0x29 returned 0 after 0 usecs
calling kobject_uevent_init+0x0/0x12 @ 1
initcall kobject_uevent_init+0x0/0x12 returned 0 after 0 usecs
calling pcibus_class_init+0x0/0x19 @ 1
initcall pcibus_class_init+0x0/0x19 returned 0 after 0 usecs
calling pci_driver_init+0x0/0x12 @ 1
initcall pci_driver_init+0x0/0x12 returned 0 after 0 usecs
calling backlight_class_init+0x0/0xa8 @ 1
initcall backlight_class_init+0x0/0xa8 returned 0 after 0 usecs
calling tty_class_init+0x0/0x34 @ 1
initcall tty_class_init+0x0/0x34 returned 0 after 0 usecs
calling vtconsole_class_init+0x0/0xbd @ 1
initcall vtconsole_class_init+0x0/0xbd returned 0 after 0 usecs
calling iommu_dev_init+0x0/0x19 @ 1
initcall iommu_dev_init+0x0/0x19 returned 0 after 0 usecs
calling mipi_dsi_bus_init+0x0/0x12 @ 1
initcall mipi_dsi_bus_init+0x0/0x12 returned 0 after 0 usecs
calling register_node_type+0x0/0x19 @ 1
initcall register_node_type+0x0/0x19 returned 0 after 0 usecs
calling regmap_initcall+0x0/0xd @ 1
initcall regmap_initcall+0x0/0xd returned 0 after 0 usecs
calling spi_init+0x0/0x83 @ 1
initcall spi_init+0x0/0x83 returned 0 after 0 usecs
calling i2c_init+0x0/0x6f @ 1
initcall i2c_init+0x0/0x6f returned 0 after 0 usecs
calling init_ladder+0x0/0x25 @ 1
cpuidle: using governor ladder
initcall init_ladder+0x0/0x25 returned 0 after 2929 usecs
calling init_menu+0x0/0x12 @ 1
cpuidle: using governor menu
initcall init_menu+0x0/0x12 returned 0 after 2929 usecs
calling boot_params_ksysfs_init+0x0/0x232 @ 1
initcall boot_params_ksysfs_init+0x0/0x232 returned 0 after 0 usecs
calling sbf_init+0x0/0xe9 @ 1
initcall sbf_init+0x0/0xe9 returned 0 after 0 usecs
calling arch_kdebugfs_init+0x0/0x1f6 @ 1
initcall arch_kdebugfs_init+0x0/0x1f6 returned 0 after 0 usecs
calling pt_init+0x0/0x273 @ 1
initcall pt_init+0x0/0x273 returned 0 after 0 usecs
calling bts_init+0x0/0xaa @ 1
initcall bts_init+0x0/0xaa returned 0 after 0 usecs
calling mtrr_if_init+0x0/0x64 @ 1
initcall mtrr_if_init+0x0/0x64 returned 0 after 0 usecs
calling ffh_cstate_init+0x0/0x2b @ 1
initcall ffh_cstate_init+0x0/0x2b returned 0 after 0 usecs
calling kcmp_cookies_init+0x0/0x36 @ 1
initcall kcmp_cookies_init+0x0/0x36 returned 0 after 0 usecs
calling acpi_pci_init+0x0/0x58 @ 1
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
initcall acpi_pci_init+0x0/0x58 returned 0 after 0 usecs
calling dma_bus_init+0x0/0xc0 @ 1
initcall dma_bus_init+0x0/0xc0 returned 0 after 0 usecs
calling dma_channel_table_init+0x0/0xcd @ 1
initcall dma_channel_table_init+0x0/0xcd returned 0 after 0 usecs
calling dmi_id_init+0x0/0x305 @ 1
initcall dmi_id_init+0x0/0x305 returned 0 after 0 usecs
calling dca_init+0x0/0x1e @ 1
dca service started, version 1.12.1
initcall dca_init+0x0/0x1e returned 0 after 0 usecs
calling pci_arch_init+0x0/0x66 @ 1
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
initcall pci_arch_init+0x0/0x66 returned 0 after 0 usecs
calling init_vdso+0x0/0x3d @ 1
initcall init_vdso+0x0/0x3d returned 0 after 0 usecs
calling sysenter_setup+0x0/0x14 @ 1
initcall sysenter_setup+0x0/0x14 returned 0 after 0 usecs
calling topology_init+0x0/0x8b @ 1
initcall topology_init+0x0/0x8b returned 0 after 0 usecs
calling fixup_ht_bug+0x0/0xb9 @ 1
initcall fixup_ht_bug+0x0/0xb9 returned 0 after 0 usecs
calling mtrr_init_finialize+0x0/0x3f @ 1
initcall mtrr_init_finialize+0x0/0x3f returned 0 after 0 usecs
calling uid_cache_init+0x0/0x8e @ 1
initcall uid_cache_init+0x0/0x8e returned 0 after 0 usecs
calling param_sysfs_init+0x0/0x1b3 @ 1
initcall param_sysfs_init+0x0/0x1b3 returned 0 after 976 usecs
calling proc_schedstat_init+0x0/0x22 @ 1
initcall proc_schedstat_init+0x0/0x22 returned 0 after 0 usecs
calling pm_sysrq_init+0x0/0x19 @ 1
initcall pm_sysrq_init+0x0/0x19 returned 0 after 2929 usecs
calling create_proc_profile+0x0/0x290 @ 1
initcall create_proc_profile+0x0/0x290 returned 0 after 0 usecs
calling user_namespaces_init+0x0/0x2d @ 1
initcall user_namespaces_init+0x0/0x2d returned 0 after 0 usecs
calling default_bdi_init+0x0/0x3e @ 1
initcall default_bdi_init+0x0/0x3e returned 0 after 0 usecs
calling percpu_enable_async+0x0/0xf @ 1
initcall percpu_enable_async+0x0/0xf returned 0 after 0 usecs
calling init_reserve_notifier+0x0/0x8 @ 1
initcall init_reserve_notifier+0x0/0x8 returned 0 after 0 usecs
calling init_admin_reserve+0x0/0x40 @ 1
initcall init_admin_reserve+0x0/0x40 returned 0 after 0 usecs
calling init_user_reserve+0x0/0x40 @ 1
initcall init_user_reserve+0x0/0x40 returned 0 after 0 usecs
calling hugetlb_init+0x0/0x525 @ 1
HugeTLB registered 2 MB page size, pre-allocated 0 pages
initcall hugetlb_init+0x0/0x525 returned 0 after 0 usecs
calling mmu_notifier_init+0x0/0x12 @ 1
initcall mmu_notifier_init+0x0/0x12 returned 0 after 0 usecs
calling ksm_init+0x0/0x14a @ 1
initcall ksm_init+0x0/0x14a returned 0 after 0 usecs
calling hugepage_init+0x0/0x16e @ 1
initcall hugepage_init+0x0/0x16e returned 0 after 0 usecs
calling mem_cgroup_swap_init+0x0/0x78 @ 1
initcall mem_cgroup_swap_init+0x0/0x78 returned 0 after 0 usecs
calling mem_cgroup_init+0x0/0x149 @ 1
initcall mem_cgroup_init+0x0/0x149 returned 0 after 0 usecs
calling crypto_wq_init+0x0/0x31 @ 1
initcall crypto_wq_init+0x0/0x31 returned 0 after 0 usecs
calling cryptomgr_init+0x0/0x12 @ 1
initcall cryptomgr_init+0x0/0x12 returned 0 after 0 usecs
calling cryptd_init+0x0/0xb9 @ 1
initcall cryptd_init+0x0/0xb9 returned 0 after 0 usecs
calling init_bio+0x0/0xd5 @ 1
initcall init_bio+0x0/0xd5 returned 0 after 0 usecs
calling blk_settings_init+0x0/0x2a @ 1
initcall blk_settings_init+0x0/0x2a returned 0 after 0 usecs
calling blk_ioc_init+0x0/0x2a @ 1
initcall blk_ioc_init+0x0/0x2a returned 0 after 0 usecs
calling blk_softirq_init+0x0/0x6a @ 1
initcall blk_softirq_init+0x0/0x6a returned 0 after 0 usecs
calling blk_mq_init+0x0/0x19 @ 1
initcall blk_mq_init+0x0/0x19 returned 0 after 0 usecs
calling genhd_device_init+0x0/0x76 @ 1
initcall genhd_device_init+0x0/0x76 returned 0 after 0 usecs
calling raid6_select_algo+0x0/0x2ea @ 1
raid6: sse2x1 gen() 8664 MB/s
raid6: sse2x1 xor() 5492 MB/s
raid6: sse2x2 gen() 10367 MB/s
raid6: sse2x2 xor() 7216 MB/s
raid6: sse2x4 gen() 11722 MB/s
raid6: sse2x4 xor() 8275 MB/s
raid6: avx2x1 gen() 20902 MB/s
raid6: avx2x2 gen() 23714 MB/s
raid6: avx2x4 gen() 26691 MB/s
raid6: using algorithm avx2x4 gen() 26691 MB/s
raid6: using avx2x2 recovery algorithm
initcall raid6_select_algo+0x0/0x2ea returned 0 after 149414 usecs
calling irq_poll_setup+0x0/0x6a @ 1
initcall irq_poll_setup+0x0/0x6a returned 0 after 0 usecs
calling pwm_debugfs_init+0x0/0x24 @ 1
initcall pwm_debugfs_init+0x0/0x24 returned 0 after 0 usecs
calling pwm_sysfs_init+0x0/0x19 @ 1
initcall pwm_sysfs_init+0x0/0x19 returned 0 after 0 usecs
calling pci_slot_init+0x0/0x50 @ 1
initcall pci_slot_init+0x0/0x50 returned 0 after 0 usecs
calling fbmem_init+0x0/0x94 @ 1
initcall fbmem_init+0x0/0x94 returned 0 after 0 usecs
calling acpi_init+0x0/0x264 @ 1
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 24 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88026C633800 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88026C6B9800 00063F (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88026C6BA000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88026C657200 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x88800000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:1918] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xdf130000-0xdf13ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0xdf14e000-0xdf14efff 64bit]
pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xdf14d000-0xdf14dfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xdf148000-0xdf149fff]
pci 0000:00:17.0: reg 0x14: [mem 0xdf14c000-0xdf14c0ff]
pci 0000:00:17.0: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:17.0: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:17.0: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:17.0: reg 0x24: [mem 0xdf14b000-0xdf14b7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1c.0: [8086:a114] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:a14a] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xdf144000-0xdf147fff]
pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xdf140000-0xdf143fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xdf120000-0xdf12ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xdf14a000-0xdf14a0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.6: [8086:15b7] type 00 class 0x020000
pci 0000:00:1f.6: reg 0x10: [mem 0xdf100000-0xdf11ffff]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: [10de:0a20] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
pci 0000:01:00.1: [10de:0be2] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xdf080000-0xdf083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1d.0: PCI bridge to [bus 03]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 5 GPEs in block 00 to 7F
initcall acpi_init+0x0/0x264 returned 0 after 37109 usecs
calling pnp_init+0x0/0x12 @ 1
initcall pnp_init+0x0/0x12 returned 0 after 0 usecs
calling misc_init+0x0/0xbc @ 1
initcall misc_init+0x0/0xbc returned 0 after 0 usecs
calling vga_arb_device_init+0x0/0x1a3 @ 1
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
initcall vga_arb_device_init+0x0/0x1a3 returned 0 after 0 usecs
calling cn_init+0x0/0xb0 @ 1
initcall cn_init+0x0/0xb0 returned 0 after 0 usecs
calling dma_buf_init+0x0/0xac @ 1
initcall dma_buf_init+0x0/0xac returned 0 after 0 usecs
calling init_scsi+0x0/0x81 @ 1
SCSI subsystem initialized
initcall init_scsi+0x0/0x81 returned 0 after 0 usecs
calling ata_init+0x0/0x329 @ 1
libata version 3.00 loaded.
initcall ata_init+0x0/0x329 returned 0 after 0 usecs
calling usb_init+0x0/0x16a @ 1
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
initcall usb_init+0x0/0x16a returned 0 after 0 usecs
calling serio_init+0x0/0x2a @ 1
initcall serio_init+0x0/0x2a returned 0 after 0 usecs
calling input_init+0x0/0xfe @ 1
initcall input_init+0x0/0xfe returned 0 after 0 usecs
calling rtc_init+0x0/0x4d @ 1
initcall rtc_init+0x0/0x4d returned 0 after 0 usecs
calling pps_init+0x0/0xaa @ 1
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
initcall pps_init+0x0/0xaa returned 0 after 0 usecs
calling ptp_init+0x0/0x99 @ 1
PTP clock support registered
initcall ptp_init+0x0/0x99 returned 0 after 0 usecs
calling hwmon_init+0x0/0xd9 @ 1
initcall hwmon_init+0x0/0xd9 returned 0 after 0 usecs
calling md_init+0x0/0x166 @ 1
initcall md_init+0x0/0x166 returned 0 after 976 usecs
calling mmc_init+0x0/0x3d @ 1
initcall mmc_init+0x0/0x3d returned 0 after 0 usecs
calling dmi_init+0x0/0x113 @ 1
initcall dmi_init+0x0/0x113 returned 0 after 0 usecs
calling efisubsys_init+0x0/0x11d @ 1
initcall efisubsys_init+0x0/0x11d returned 0 after 0 usecs
calling hv_acpi_init+0x0/0x199 @ 1
initcall hv_acpi_init+0x0/0x199 returned -19 after 0 usecs
calling devfreq_init+0x0/0xa3 @ 1
initcall devfreq_init+0x0/0xa3 returned 0 after 0 usecs
calling devfreq_performance_init+0x0/0x12 @ 1
initcall devfreq_performance_init+0x0/0x12 returned 0 after 0 usecs
calling pci_subsys_init+0x0/0x48 @ 1
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x7f9a2018-0x7fffffff]
e820: reserve RAM buffer [mem 0x7f9b4018-0x7fffffff]
e820: reserve RAM buffer [mem 0x82040000-0x83ffffff]
e820: reserve RAM buffer [mem 0x820dd000-0x83ffffff]
e820: reserve RAM buffer [mem 0x86f7a000-0x87ffffff]
e820: reserve RAM buffer [mem 0x8746e000-0x87ffffff]
e820: reserve RAM buffer [mem 0x276800000-0x277ffffff]
initcall pci_subsys_init+0x0/0x48 returned 0 after 27343 usecs
calling proto_init+0x0/0x12 @ 1
initcall proto_init+0x0/0x12 returned 0 after 0 usecs
calling net_dev_init+0x0/0x1b1 @ 1
initcall net_dev_init+0x0/0x1b1 returned 0 after 0 usecs
calling neigh_init+0x0/0x80 @ 1
initcall neigh_init+0x0/0x80 returned 0 after 0 usecs
calling fib_rules_init+0x0/0xaa @ 1
initcall fib_rules_init+0x0/0xaa returned 0 after 0 usecs
calling init_cgroup_netprio+0x0/0x14 @ 1
initcall init_cgroup_netprio+0x0/0x14 returned 0 after 0 usecs
calling pktsched_init+0x0/0x111 @ 1
initcall pktsched_init+0x0/0x111 returned 0 after 0 usecs
calling tc_filter_init+0x0/0x55 @ 1
initcall tc_filter_init+0x0/0x55 returned 0 after 0 usecs
calling genl_init+0x0/0x85 @ 1
initcall genl_init+0x0/0x85 returned 0 after 0 usecs
calling ipv4_netfilter_init+0x0/0x12 @ 1
initcall ipv4_netfilter_init+0x0/0x12 returned 0 after 0 usecs
calling cipso_v4_init+0x0/0x5e @ 1
initcall cipso_v4_init+0x0/0x5e returned 0 after 0 usecs
calling netlbl_init+0x0/0x79 @ 1
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
initcall netlbl_init+0x0/0x79 returned 0 after 0 usecs
calling nmi_warning_debugfs+0x0/0x27 @ 1
initcall nmi_warning_debugfs+0x0/0x27 returned 0 after 0 usecs
calling hpet_late_init+0x0/0xef @ 1
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
initcall hpet_late_init+0x0/0xef returned 0 after 1953 usecs
calling clocksource_done_booting+0x0/0x42 @ 1
clocksource: Switched to clocksource hpet
initcall clocksource_done_booting+0x0/0x42 returned 0 after 14 usecs
calling tracer_init_tracefs+0x0/0x183 @ 1
initcall tracer_init_tracefs+0x0/0x183 returned 0 after 419 usecs
calling init_trace_printk_function_export+0x0/0x32 @ 1
initcall init_trace_printk_function_export+0x0/0x32 returned 0 after 4 usecs
calling event_trace_init+0x0/0x30d @ 1
initcall event_trace_init+0x0/0x30d returned 0 after 4787 usecs
calling bpf_init+0x0/0x50 @ 1
initcall bpf_init+0x0/0x50 returned 0 after 4 usecs
calling init_pipe_fs+0x0/0x47 @ 1
initcall init_pipe_fs+0x0/0x47 returned 0 after 6 usecs
calling cgroup_writeback_init+0x0/0x2b @ 1
initcall cgroup_writeback_init+0x0/0x2b returned 0 after 25 usecs
calling inotify_user_setup+0x0/0x4b @ 1
initcall inotify_user_setup+0x0/0x4b returned 0 after 35 usecs
calling eventpoll_init+0x0/0xdd @ 1
initcall eventpoll_init+0x0/0xdd returned 0 after 4 usecs
calling anon_inode_init+0x0/0x5b @ 1
initcall anon_inode_init+0x0/0x5b returned 0 after 5 usecs
calling proc_locks_init+0x0/0x22 @ 1
initcall proc_locks_init+0x0/0x22 returned 0 after 4 usecs
calling proc_cmdline_init+0x0/0x22 @ 1
initcall proc_cmdline_init+0x0/0x22 returned 0 after 4 usecs
calling proc_consoles_init+0x0/0x22 @ 1
initcall proc_consoles_init+0x0/0x22 returned 0 after 4 usecs
calling proc_cpuinfo_init+0x0/0x22 @ 1
initcall proc_cpuinfo_init+0x0/0x22 returned 0 after 4 usecs
calling proc_devices_init+0x0/0x22 @ 1
initcall proc_devices_init+0x0/0x22 returned 0 after 4 usecs
calling proc_interrupts_init+0x0/0x22 @ 1
initcall proc_interrupts_init+0x0/0x22 returned 0 after 4 usecs
calling proc_loadavg_init+0x0/0x22 @ 1
initcall proc_loadavg_init+0x0/0x22 returned 0 after 4 usecs
calling proc_meminfo_init+0x0/0x22 @ 1
initcall proc_meminfo_init+0x0/0x22 returned 0 after 4 usecs
calling proc_stat_init+0x0/0x22 @ 1
initcall proc_stat_init+0x0/0x22 returned 0 after 4 usecs
calling proc_uptime_init+0x0/0x22 @ 1
initcall proc_uptime_init+0x0/0x22 returned 0 after 4 usecs
calling proc_version_init+0x0/0x22 @ 1
initcall proc_version_init+0x0/0x22 returned 0 after 4 usecs
calling proc_softirqs_init+0x0/0x22 @ 1
initcall proc_softirqs_init+0x0/0x22 returned 0 after 4 usecs
calling proc_kmsg_init+0x0/0x25 @ 1
initcall proc_kmsg_init+0x0/0x25 returned 0 after 4 usecs
calling proc_page_init+0x0/0x5f @ 1
initcall proc_page_init+0x0/0x5f returned 0 after 4 usecs
calling init_ramfs_fs+0x0/0x20 @ 1
initcall init_ramfs_fs+0x0/0x20 returned 0 after 4 usecs
calling init_hugetlbfs_fs+0x0/0x128 @ 1
initcall init_hugetlbfs_fs+0x0/0x128 returned 0 after 11 usecs
calling blk_scsi_ioctl_init+0x0/0x36a @ 1
initcall blk_scsi_ioctl_init+0x0/0x36a returned 0 after 4 usecs
calling dynamic_debug_init_debugfs+0x0/0x67 @ 1
initcall dynamic_debug_init_debugfs+0x0/0x67 returned 0 after 4 usecs
calling fb_console_init+0x0/0xfc @ 1
initcall fb_console_init+0x0/0xfc returned 0 after 12 usecs
calling acpi_event_init+0x0/0x3b @ 1
initcall acpi_event_init+0x0/0x3b returned 0 after 5 usecs
calling pnp_system_init+0x0/0x12 @ 1
initcall pnp_system_init+0x0/0x12 returned 0 after 5 usecs
calling pnpacpi_init+0x0/0x6e @ 1
pnp: PnP ACPI init
system 00:00: [io 0x0280-0x028f] has been reserved
system 00:00: [io 0x0290-0x029f] has been reserved
system 00:00: [io 0x02a0-0x02af] has been reserved
system 00:00: [io 0x02b0-0x02bf] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x1800-0x18fe] could not be reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0800-0x087f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [io 0x1854-0x1857] has been reserved
system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] has been reserved
system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:05: [mem 0xdffc0000-0xdffdffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io 0xff00-0xfffe] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
initcall pnpacpi_init+0x0/0x6e returned 0 after 2132 usecs
calling chr_dev_init+0x0/0xaa @ 1
initcall chr_dev_init+0x0/0xaa returned 0 after 3405 usecs
calling firmware_class_init+0x0/0x31 @ 1
initcall firmware_class_init+0x0/0x31 returned 0 after 4 usecs
calling thermal_init+0x0/0x96 @ 1
initcall thermal_init+0x0/0x96 returned 0 after 7 usecs
calling cpufreq_gov_performance_init+0x0/0x12 @ 1
initcall cpufreq_gov_performance_init+0x0/0x12 returned 0 after 4 usecs
calling init_acpi_pm_clocksource+0x0/0xcf @ 1
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
initcall init_acpi_pm_clocksource+0x0/0xcf returned 0 after 4416 usecs
calling pcibios_assign_resources+0x0/0xba @ 1
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1d.0: PCI bridge to [bus 03]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x88800000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
initcall pcibios_assign_resources+0x0/0xba returned 0 after 48 usecs
calling sysctl_core_init+0x0/0x2c @ 1
initcall sysctl_core_init+0x0/0x2c returned 0 after 10 usecs
calling eth_offload_init+0x0/0x14 @ 1
initcall eth_offload_init+0x0/0x14 returned 0 after 4 usecs
calling inet_init+0x0/0x26e @ 1
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
initcall inet_init+0x0/0x26e returned 0 after 353 usecs
calling ipv4_offload_init+0x0/0x5d @ 1
initcall ipv4_offload_init+0x0/0x5d returned 0 after 4 usecs
calling af_unix_init+0x0/0x4e @ 1
NET: Registered protocol family 1
initcall af_unix_init+0x0/0x4e returned 0 after 6 usecs
calling ipv6_offload_init+0x0/0x79 @ 1
initcall ipv6_offload_init+0x0/0x79 returned 0 after 4 usecs
calling pci_apply_final_quirks+0x0/0x107 @ 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 0 bytes, default 64
initcall pci_apply_final_quirks+0x0/0x107 returned 0 after 10473 usecs
calling acpi_reserve_resources+0x0/0xeb @ 1
initcall acpi_reserve_resources+0x0/0xeb returned 0 after 4 usecs
calling populate_rootfs+0x0/0xa6 @ 1
initcall populate_rootfs+0x0/0xa6 returned 0 after 27 usecs
calling pci_iommu_init+0x0/0x3c @ 1
DMAR: No ATSR found
DMAR: dmar0: Using Queued invalidation
DMAR: Setting RMRR:
DMAR: Setting identity map for device 0000:00:14.0 [0x87029000 - 0x87048fff]
DMAR: Prepare 0-16MiB unity mapping for LPC
DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
DMAR: Intel(R) Virtualization Technology for Directed I/O
iommu: Adding device 0000:00:00.0 to group 0
iommu: Adding device 0000:00:01.0 to group 1
iommu: Adding device 0000:00:14.0 to group 2
iommu: Adding device 0000:00:14.2 to group 2
iommu: Adding device 0000:00:16.0 to group 3
iommu: Adding device 0000:00:17.0 to group 4
iommu: Adding device 0000:00:1c.0 to group 5
iommu: Adding device 0000:00:1d.0 to group 6
iommu: Adding device 0000:00:1f.0 to group 7
iommu: Adding device 0000:00:1f.2 to group 7
iommu: Adding device 0000:00:1f.3 to group 7
iommu: Adding device 0000:00:1f.4 to group 7
iommu: Adding device 0000:00:1f.6 to group 8
iommu: Adding device 0000:01:00.0 to group 1
iommu: Adding device 0000:01:00.1 to group 1
initcall pci_iommu_init+0x0/0x3c returned 0 after 1448 usecs
calling ir_dev_scope_init+0x0/0x33 @ 1
initcall ir_dev_scope_init+0x0/0x33 returned 0 after 4 usecs
calling ia32_binfmt_init+0x0/0x14 @ 1
initcall ia32_binfmt_init+0x0/0x14 returned 0 after 4 usecs
calling vmx_init+0x0/0x1e @ 1
initcall vmx_init+0x0/0x1e returned 0 after 309 usecs
calling register_kernel_offset_dumper+0x0/0x1b @ 1
initcall register_kernel_offset_dumper+0x0/0x1b returned 0 after 4 usecs
calling i8259A_init_ops+0x0/0x24 @ 1
initcall i8259A_init_ops+0x0/0x24 returned 0 after 4 usecs
calling init_tsc_clocksource+0x0/0xb7 @ 1
initcall init_tsc_clocksource+0x0/0xb7 returned 0 after 4 usecs
calling add_rtc_cmos+0x0/0xcc @ 1
initcall add_rtc_cmos+0x0/0xcc returned 0 after 4 usecs
calling i8237A_init_ops+0x0/0x14 @ 1
initcall i8237A_init_ops+0x0/0x14 returned 0 after 4 usecs
calling rapl_pmu_init+0x0/0x27d @ 1
initcall rapl_pmu_init+0x0/0x27d returned 0 after 4 usecs
calling intel_cqm_init+0x0/0x35d @ 1
initcall intel_cqm_init+0x0/0x35d returned -19 after 4 usecs
calling cstate_pmu_init+0x0/0x185 @ 1
initcall cstate_pmu_init+0x0/0x185 returned 0 after 8 usecs
calling intel_uncore_init+0x0/0x317 @ 1
initcall intel_uncore_init+0x0/0x317 returned -19 after 6 usecs
calling msr_init+0x0/0xc0 @ 1
initcall msr_init+0x0/0xc0 returned 0 after 4 usecs
calling thermal_throttle_init_device+0x0/0x82 @ 1
initcall thermal_throttle_init_device+0x0/0x82 returned 0 after 14 usecs
calling amd_ibs_init+0x0/0x182 @ 1
initcall amd_ibs_init+0x0/0x182 returned -19 after 4 usecs
calling msr_init+0x0/0x136 @ 1
initcall msr_init+0x0/0x136 returned 0 after 365 usecs
calling cpuid_init+0x0/0x136 @ 1
initcall cpuid_init+0x0/0x136 returned 0 after 430 usecs
calling ioapic_init_ops+0x0/0x14 @ 1
initcall ioapic_init_ops+0x0/0x14 returned 0 after 4 usecs
calling start_periodic_check_for_corruption+0x0/0x50 @ 1
initcall start_periodic_check_for_corruption+0x0/0x50 returned 0 after 4 usecs
calling sysfb_init+0x0/0x6f @ 1
initcall sysfb_init+0x0/0x6f returned 0 after 12 usecs
calling aes_init+0x0/0x12 @ 1
initcall aes_init+0x0/0x12 returned 0 after 114 usecs
calling init+0x0/0x45 @ 1
initcall init+0x0/0x45 returned 0 after 726 usecs
calling crc32c_intel_mod_init+0x0/0x76 @ 1
initcall crc32c_intel_mod_init+0x0/0x76 returned 0 after 132 usecs
calling sha256_ssse3_mod_init+0x0/0xe7 @ 1
initcall sha256_ssse3_mod_init+0x0/0xe7 returned 0 after 829 usecs
calling sha512_ssse3_mod_init+0x0/0xab @ 1
initcall sha512_ssse3_mod_init+0x0/0xab returned 0 after 760 usecs
calling camellia_aesni_init+0x0/0x7e @ 1
initcall camellia_aesni_init+0x0/0x7e returned 0 after 1649 usecs
calling serpent_init+0x0/0x41 @ 1
initcall serpent_init+0x0/0x41 returned 0 after 1273 usecs
calling camellia_aesni_init+0x0/0x8d @ 1
initcall camellia_aesni_init+0x0/0x8d returned 0 after 1594 usecs
calling init+0x0/0x71 @ 1
initcall init+0x0/0x71 returned 0 after 1304 usecs
calling pmc_atom_init+0x0/0x1c1 @ 1
initcall pmc_atom_init+0x0/0x1c1 returned -19 after 4 usecs
calling iosf_mbi_init+0x0/0x1b @ 1
initcall iosf_mbi_init+0x0/0x1b returned 0 after 66 usecs
calling proc_execdomains_init+0x0/0x22 @ 1
initcall proc_execdomains_init+0x0/0x22 returned 0 after 4 usecs
calling ioresources_init+0x0/0x3c @ 1
initcall ioresources_init+0x0/0x3c returned 0 after 4 usecs
calling init_sched_debug_procfs+0x0/0x2c @ 1
initcall init_sched_debug_procfs+0x0/0x2c returned 0 after 4 usecs
calling init_posix_timers+0x0/0x252 @ 1
initcall init_posix_timers+0x0/0x252 returned 0 after 7 usecs
calling init_posix_cpu_timers+0x0/0x99 @ 1
initcall init_posix_cpu_timers+0x0/0x99 returned 0 after 4 usecs
calling timekeeping_init_ops+0x0/0x14 @ 1
initcall timekeeping_init_ops+0x0/0x14 returned 0 after 4 usecs
calling init_clocksource_sysfs+0x0/0x69 @ 1
initcall init_clocksource_sysfs+0x0/0x69 returned 0 after 22 usecs
calling init_timer_list_procfs+0x0/0x2c @ 1
initcall init_timer_list_procfs+0x0/0x2c returned 0 after 4 usecs
calling alarmtimer_init+0x0/0x18a @ 1
initcall alarmtimer_init+0x0/0x18a returned 0 after 17 usecs
calling clockevents_init_sysfs+0x0/0xca @ 1
initcall clockevents_init_sysfs+0x0/0xca returned 0 after 67 usecs
calling init_tstats_procfs+0x0/0x2c @ 1
initcall init_tstats_procfs+0x0/0x2c returned 0 after 4 usecs
calling futex_init+0x0/0xd6 @ 1
futex hash table entries: 2048 (order: 5, 131072 bytes)
initcall futex_init+0x0/0xd6 returned 0 after 21 usecs
calling proc_dma_init+0x0/0x22 @ 1
initcall proc_dma_init+0x0/0x22 returned 0 after 4 usecs
calling proc_modules_init+0x0/0x22 @ 1
initcall proc_modules_init+0x0/0x22 returned 0 after 4 usecs
calling kallsyms_init+0x0/0x25 @ 1
initcall kallsyms_init+0x0/0x25 returned 0 after 4 usecs
calling pid_namespaces_init+0x0/0x40 @ 1
initcall pid_namespaces_init+0x0/0x40 returned 0 after 6 usecs
calling utsname_sysctl_init+0x0/0x14 @ 1
initcall utsname_sysctl_init+0x0/0x14 returned 0 after 5 usecs
calling init_tracepoints+0x0/0x28 @ 1
initcall init_tracepoints+0x0/0x28 returned 0 after 4 usecs
calling init_lstats_procfs+0x0/0x25 @ 1
initcall init_lstats_procfs+0x0/0x25 returned 0 after 4 usecs
calling init_blk_tracer+0x0/0x56 @ 1
initcall init_blk_tracer+0x0/0x56 returned 0 after 7 usecs
calling perf_event_sysfs_init+0x0/0x91 @ 1
initcall perf_event_sysfs_init+0x0/0x91 returned 0 after 93 usecs
calling system_trusted_keyring_init+0x0/0x63 @ 1
Initialise system trusted keyring
initcall system_trusted_keyring_init+0x0/0x63 returned 0 after 6 usecs
calling init_per_zone_wmark_min+0x0/0x9f @ 1
initcall init_per_zone_wmark_min+0x0/0x9f returned 0 after 4 usecs
calling kswapd_init+0x0/0x6f @ 1
initcall kswapd_init+0x0/0x6f returned 0 after 71 usecs
calling extfrag_debug_init+0x0/0x78 @ 1
initcall extfrag_debug_init+0x0/0x78 returned 0 after 8 usecs
calling setup_vmstat+0x0/0x1ac @ 1
initcall setup_vmstat+0x0/0x1ac returned 0 after 190 usecs
calling mm_compute_batch_init+0x0/0x56 @ 1
initcall mm_compute_batch_init+0x0/0x56 returned 0 after 8 usecs
calling workingset_init+0x0/0x4b @ 1
initcall workingset_init+0x0/0x4b returned 0 after 8 usecs
calling proc_vmalloc_init+0x0/0x25 @ 1
initcall proc_vmalloc_init+0x0/0x25 returned 0 after 8 usecs
calling procswaps_init+0x0/0x22 @ 1
initcall procswaps_init+0x0/0x22 returned 0 after 21 usecs
calling slab_sysfs_init+0x0/0xf0 @ 1
initcall slab_sysfs_init+0x0/0xf0 returned 0 after 809 usecs
calling fcntl_init+0x0/0x2a @ 1
initcall fcntl_init+0x0/0x2a returned 0 after 4 usecs
calling proc_filesystems_init+0x0/0x22 @ 1
initcall proc_filesystems_init+0x0/0x22 returned 0 after 4 usecs
calling start_dirtytime_writeback+0x0/0x2a @ 1
initcall start_dirtytime_writeback+0x0/0x2a returned 0 after 4 usecs
calling dio_init+0x0/0x2d @ 1
initcall dio_init+0x0/0x2d returned 0 after 15 usecs
calling dnotify_init+0x0/0x79 @ 1
initcall dnotify_init+0x0/0x79 returned 0 after 4 usecs
calling fanotify_user_setup+0x0/0x52 @ 1
initcall fanotify_user_setup+0x0/0x52 returned 0 after 5 usecs
calling aio_setup+0x0/0xa3 @ 1
initcall aio_setup+0x0/0xa3 returned 0 after 8 usecs
calling init_sys32_ioctl+0x0/0x28 @ 1
initcall init_sys32_ioctl+0x0/0x28 returned 0 after 59 usecs
calling init_mbcache+0x0/0x14 @ 1
initcall init_mbcache+0x0/0x14 returned 0 after 4 usecs
calling init_devpts_fs+0x0/0x64 @ 1
initcall init_devpts_fs+0x0/0x64 returned 0 after 8 usecs
calling ext4_init_fs+0x0/0x1a3 @ 1
initcall ext4_init_fs+0x0/0x1a3 returned 0 after 62 usecs
calling journal_init+0x0/0x107 @ 1
initcall journal_init+0x0/0x107 returned 0 after 56 usecs
calling init_fat_fs+0x0/0x4a @ 1
initcall init_fat_fs+0x0/0x4a returned 0 after 22 usecs
calling init_vfat_fs+0x0/0x12 @ 1
initcall init_vfat_fs+0x0/0x12 returned 0 after 4 usecs
calling init_msdos_fs+0x0/0x12 @ 1
initcall init_msdos_fs+0x0/0x12 returned 0 after 4 usecs
calling init_nls_cp437+0x0/0x14 @ 1
initcall init_nls_cp437+0x0/0x14 returned 0 after 4 usecs
calling init_nls_ascii+0x0/0x14 @ 1
initcall init_nls_ascii+0x0/0x14 returned 0 after 4 usecs
calling init_autofs4_fs+0x0/0x26 @ 1
initcall init_autofs4_fs+0x0/0x26 returned 0 after 42 usecs
calling ovl_init+0x0/0x12 @ 1
initcall ovl_init+0x0/0x12 returned 0 after 4 usecs
calling init_xfs_fs+0x0/0x190 @ 1
SGI XFS with ACLs, security attributes, realtime, no debug enabled
initcall init_xfs_fs+0x0/0x190 returned 0 after 460 usecs
calling init_pstore_fs+0x0/0x47 @ 1
initcall init_pstore_fs+0x0/0x47 returned 0 after 26 usecs
calling efivarfs_init+0x0/0x34 @ 1
initcall efivarfs_init+0x0/0x34 returned 0 after 13 usecs
calling ipc_init+0x0/0x17 @ 1
initcall ipc_init+0x0/0x17 returned 0 after 8 usecs
calling ipc_sysctl_init+0x0/0x14 @ 1
initcall ipc_sysctl_init+0x0/0x14 returned 0 after 7 usecs
calling init_mqueue_fs+0x0/0x106 @ 1
initcall init_mqueue_fs+0x0/0x106 returned 0 after 25 usecs
calling key_proc_init+0x0/0x5e @ 1
initcall key_proc_init+0x0/0x5e returned 0 after 4 usecs
calling crypto_algapi_init+0x0/0xd @ 1
initcall crypto_algapi_init+0x0/0xd returned 0 after 4 usecs
calling chainiv_module_init+0x0/0x12 @ 1
initcall chainiv_module_init+0x0/0x12 returned 0 after 4 usecs
calling eseqiv_module_init+0x0/0x12 @ 1
initcall eseqiv_module_init+0x0/0x12 returned 0 after 4 usecs
calling seqiv_module_init+0x0/0x12 @ 1
initcall seqiv_module_init+0x0/0x12 returned 0 after 4 usecs
calling echainiv_module_init+0x0/0x12 @ 1
initcall echainiv_module_init+0x0/0x12 returned 0 after 4 usecs
calling hmac_module_init+0x0/0x12 @ 1
initcall hmac_module_init+0x0/0x12 returned 0 after 39 usecs
calling crypto_null_mod_init+0x0/0x48 @ 1
initcall crypto_null_mod_init+0x0/0x48 returned 0 after 434 usecs
calling md5_mod_init+0x0/0x12 @ 1
initcall md5_mod_init+0x0/0x12 returned 0 after 116 usecs
calling sha1_generic_mod_init+0x0/0x12 @ 1
initcall sha1_generic_mod_init+0x0/0x12 returned 0 after 123 usecs
calling sha256_generic_mod_init+0x0/0x17 @ 1
initcall sha256_generic_mod_init+0x0/0x17 returned 0 after 303 usecs
calling sha512_generic_mod_init+0x0/0x17 @ 1
initcall sha512_generic_mod_init+0x0/0x17 returned 0 after 276 usecs
calling crypto_ecb_module_init+0x0/0x12 @ 1
initcall crypto_ecb_module_init+0x0/0x12 returned 0 after 4 usecs
calling crypto_cbc_module_init+0x0/0x12 @ 1
initcall crypto_cbc_module_init+0x0/0x12 returned 0 after 4 usecs
calling crypto_module_init+0x0/0x12 @ 1
initcall crypto_module_init+0x0/0x12 returned 0 after 4 usecs
calling crypto_module_init+0x0/0x12 @ 1
initcall crypto_module_init+0x0/0x12 returned 0 after 4 usecs
calling crypto_ctr_module_init+0x0/0x39 @ 1
initcall crypto_ctr_module_init+0x0/0x39 returned 0 after 4 usecs
calling crypto_ccm_module_init+0x0/0x58 @ 1
initcall crypto_ccm_module_init+0x0/0x58 returned 0 after 4 usecs
calling serpent_mod_init+0x0/0x17 @ 1
initcall serpent_mod_init+0x0/0x17 returned 0 after 214 usecs
calling aes_init+0x0/0x12 @ 1
initcall aes_init+0x0/0x12 returned 0 after 109 usecs
calling arc4_init+0x0/0x17 @ 1
initcall arc4_init+0x0/0x17 returned 0 after 283 usecs
calling deflate_mod_init+0x0/0x12 @ 1
initcall deflate_mod_init+0x0/0x12 returned 0 after 156 usecs
calling zlib_mod_init+0x0/0x12 @ 1
initcall zlib_mod_init+0x0/0x12 returned 0 after 163 usecs
calling crc32c_mod_init+0x0/0x12 @ 1
initcall crc32c_mod_init+0x0/0x12 returned 0 after 130 usecs
calling crct10dif_mod_init+0x0/0x12 @ 1
initcall crct10dif_mod_init+0x0/0x12 returned 0 after 110 usecs
calling drbg_init+0x0/0x1b2 @ 1
initcall drbg_init+0x0/0x1b2 returned 0 after 1617 usecs
calling jent_mod_init+0x0/0x30 @ 1
initcall jent_mod_init+0x0/0x30 returned 0 after 210 usecs
calling af_alg_init+0x0/0x3b @ 1
NET: Registered protocol family 38
initcall af_alg_init+0x0/0x3b returned 0 after 4 usecs
calling algif_hash_init+0x0/0x12 @ 1
initcall algif_hash_init+0x0/0x12 returned 0 after 4 usecs
calling algif_skcipher_init+0x0/0x12 @ 1
initcall algif_skcipher_init+0x0/0x12 returned 0 after 4 usecs
calling asymmetric_key_init+0x0/0x12 @ 1
Key type asymmetric registered
initcall asymmetric_key_init+0x0/0x12 returned 0 after 4 usecs
calling x509_key_init+0x0/0x12 @ 1
Asymmetric key parser 'x509' registered
initcall x509_key_init+0x0/0x12 returned 0 after 4 usecs
calling proc_genhd_init+0x0/0x3c @ 1
initcall proc_genhd_init+0x0/0x3c returned 0 after 4 usecs
calling bsg_init+0x0/0x128 @ 1
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
initcall bsg_init+0x0/0x128 returned 0 after 21 usecs
calling throtl_init+0x0/0x42 @ 1
initcall throtl_init+0x0/0x42 returned 0 after 171 usecs
calling noop_init+0x0/0x12 @ 1
io scheduler noop registered
initcall noop_init+0x0/0x12 returned 0 after 8 usecs
calling deadline_init+0x0/0x12 @ 1
io scheduler deadline registered
initcall deadline_init+0x0/0x12 returned 0 after 4 usecs
calling cfq_init+0x0/0x88 @ 1
io scheduler cfq registered (default)
initcall cfq_init+0x0/0x88 returned 0 after 7 usecs
calling crc_t10dif_mod_init+0x0/0x61 @ 1
initcall crc_t10dif_mod_init+0x0/0x61 returned 0 after 4 usecs
calling libcrc32c_mod_init+0x0/0x2b @ 1
initcall libcrc32c_mod_init+0x0/0x2b returned 0 after 4 usecs
calling percpu_counter_startup+0x0/0x38 @ 1
initcall percpu_counter_startup+0x0/0x38 returned 0 after 4 usecs
calling pci_proc_init+0x0/0x65 @ 1
initcall pci_proc_init+0x0/0x65 returned 0 after 13 usecs
calling pcie_portdrv_init+0x0/0x75 @ 1
initcall pcie_portdrv_init+0x0/0x75 returned 0 after 363 usecs
calling pcie_pme_service_init+0x0/0x12 @ 1
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1d.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1d.0:pcie01: service driver pcie_pme loaded
initcall pcie_pme_service_init+0x0/0x12 returned 0 after 51 usecs
calling pci_hotplug_init+0x0/0x1b @ 1
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
initcall pci_hotplug_init+0x0/0x1b returned 0 after 4 usecs
calling pci_stub_init+0x0/0x127 @ 1
initcall pci_stub_init+0x0/0x127 returned 0 after 7 usecs
calling efifb_driver_init+0x0/0x14 @ 1
efifb: probing for efifb
efifb: framebuffer at 0xd1000000, mapped to 0xffffc90001000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
initcall efifb_driver_init+0x0/0x14 returned 0 after 3040 usecs
calling intel_idle_init+0x0/0x4eb @ 1
intel_idle: MWAIT substates: 0x142120
intel_idle: v0.4.1 model 0x5E
intel_idle: lapic_timer_reliable_states 0xffffffff
initcall intel_idle_init+0x0/0x4eb returned 0 after 277 usecs
calling acpi_button_driver_init+0x0/0x12 @ 1
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
initcall acpi_button_driver_init+0x0/0x12 returned 0 after 107 usecs
calling acpi_fan_driver_init+0x0/0x14 @ 1
initcall acpi_fan_driver_init+0x0/0x14 returned 0 after 7 usecs
calling acpi_video_init+0x0/0x89 @ 1
initcall acpi_video_init+0x0/0x89 returned 0 after 65 usecs
calling acpi_processor_driver_init+0x0/0x47 @ 1
initcall acpi_processor_driver_init+0x0/0x47 returned 0 after 102 usecs
calling acpi_thermal_init+0x0/0x7d @ 1
initcall acpi_thermal_init+0x0/0x7d returned 0 after 274 usecs
calling acpi_ec_sys_init+0x0/0xfc @ 1
initcall acpi_ec_sys_init+0x0/0xfc returned -19 after 4 usecs
calling acpi_pad_init+0x0/0xe3 @ 1
initcall acpi_pad_init+0x0/0xe3 returned 0 after 21 usecs
calling erst_init+0x0/0x2f1 @ 1
initcall erst_init+0x0/0x2f1 returned 0 after 4 usecs
calling ioat_init_module+0x0/0xb5 @ 1
ioatdma: Intel(R) QuickData Technology Driver 4.00
initcall ioat_init_module+0x0/0xb5 returned 0 after 15 usecs
calling virtio_pci_driver_init+0x0/0x1b @ 1
initcall virtio_pci_driver_init+0x0/0x1b returned 0 after 8 usecs
calling pty_init+0x0/0x210 @ 1
initcall pty_init+0x0/0x210 returned 0 after 72 usecs
calling sysrq_init+0x0/0x6f @ 1
initcall sysrq_init+0x0/0x6f returned 0 after 4 usecs
calling serial8250_init+0x0/0x15c @ 1
initcall serial8250_init+0x0/0x15c returned 0 after 399 usecs
calling serial_pci_driver_init+0x0/0x1b @ 1
initcall serial_pci_driver_init+0x0/0x1b returned 0 after 13 usecs
calling ttyprintk_init+0x0/0xff @ 1
initcall ttyprintk_init+0x0/0xff returned 0 after 68 usecs
calling init+0x0/0x100 @ 1
initcall init+0x0/0x100 returned 0 after 15 usecs
calling hpet_init+0x0/0x65 @ 1
initcall hpet_init+0x0/0x65 returned 0 after 134 usecs
calling hwrng_modinit+0x0/0x12 @ 1
initcall hwrng_modinit+0x0/0x12 returned 0 after 66 usecs
calling mod_init+0x0/0x1ed @ 1
initcall mod_init+0x0/0x1ed returned -19 after 16 usecs
calling virtio_rng_driver_init+0x0/0x12 @ 1
initcall virtio_rng_driver_init+0x0/0x12 returned 0 after 5 usecs
calling drm_core_init+0x0/0xed @ 1
[drm] Initialized drm 1.1.0 20060810
initcall drm_core_init+0x0/0xed returned 0 after 8 usecs
calling ttm_init+0x0/0x60 @ 1
initcall ttm_init+0x0/0x60 returned 0 after 11 usecs
calling i915_init+0x0/0x99 @ 1
initcall i915_init+0x0/0x99 returned 0 after 13 usecs
calling cirrus_init+0x0/0x3e @ 1
initcall cirrus_init+0x0/0x3e returned 0 after 8 usecs
calling cn_proc_init+0x0/0x36 @ 1
initcall cn_proc_init+0x0/0x36 returned 0 after 4 usecs
calling topology_sysfs_init+0x0/0x80 @ 1
initcall topology_sysfs_init+0x0/0x80 returned 0 after 27 usecs
calling cacheinfo_sysfs_init+0x0/0x8a @ 1
initcall cacheinfo_sysfs_init+0x0/0x8a returned 0 after 450 usecs
calling devcoredump_init+0x0/0x19 @ 1
initcall devcoredump_init+0x0/0x19 returned 0 after 5 usecs
calling loop_init+0x0/0x149 @ 1
loop: module loaded
initcall loop_init+0x0/0x149 returned 0 after 3513 usecs
calling init_cryptoloop+0x0/0x28 @ 1
initcall init_cryptoloop+0x0/0x28 returned 0 after 4 usecs
calling init+0x0/0x7e @ 1
initcall init+0x0/0x7e returned 0 after 40 usecs
calling raid_init+0x0/0x12 @ 1
initcall raid_init+0x0/0x12 returned 0 after 52 usecs
calling spi_transport_init+0x0/0x77 @ 1
initcall spi_transport_init+0x0/0x77 returned 0 after 17 usecs
calling fc_transport_init+0x0/0x89 @ 1
initcall fc_transport_init+0x0/0x89 returned 0 after 13 usecs
calling sas_transport_init+0x0/0xbf @ 1
initcall sas_transport_init+0x0/0xbf returned 0 after 13 usecs
calling sas_class_init+0x0/0x34 @ 1
initcall sas_class_init+0x0/0x34 returned 0 after 8 usecs
calling blogic_init+0x0/0x1068 @ 1
initcall blogic_init+0x0/0x1068 returned 0 after 67 usecs
calling isci_init+0x0/0x6c @ 1
isci: Intel(R) C600 SAS Controller Driver - version 1.2.0
initcall isci_init+0x0/0x6c returned 0 after 12 usecs
calling hpsa_init+0x0/0x52 @ 1
initcall hpsa_init+0x0/0x52 returned 0 after 13 usecs
calling megasas_init+0x0/0x1b5 @ 1
megasas: 06.808.16.00-rc1
initcall megasas_init+0x0/0x1b5 returned 0 after 17 usecs
calling _mpt3sas_init+0x0/0xd7 @ 1
mpt3sas version 09.102.00.00 loaded
initcall _mpt3sas_init+0x0/0xd7 returned 0 after 190 usecs
calling init+0x0/0xcc @ 1
initcall init+0x0/0xcc returned 0 after 9 usecs
calling pvscsi_init+0x0/0x35 @ 1
VMware PVSCSI driver - version 1.0.6.0-k
initcall pvscsi_init+0x0/0x35 returned 0 after 10 usecs
calling storvsc_drv_init+0x0/0x88 @ 1
hv_vmbus: registering driver hv_storvsc
initcall storvsc_drv_init+0x0/0x88 returned -19 after 4 usecs
calling init_sd+0x0/0x16b @ 1
initcall init_sd+0x0/0x16b returned 0 after 10 usecs
calling init_sg+0x0/0xc9 @ 1
initcall init_sg+0x0/0xc9 returned 0 after 4 usecs
calling nvme_init+0x0/0x88 @ 1
initcall nvme_init+0x0/0x88 returned 0 after 132 usecs
calling ahci_pci_driver_init+0x0/0x1b @ 1
ahci 0000:00:17.0: version 3.0
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b100 irq 124
ata2: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b180 irq 124
ata3: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b200 irq 124
ata4: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b280 irq 124
ata5: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b300 irq 124
ata6: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b380 irq 124
initcall ahci_pci_driver_init+0x0/0x1b returned 0 after 21255 usecs
calling ahci_driver_init+0x0/0x14 @ 1
initcall ahci_driver_init+0x0/0x14 returned 0 after 26 usecs
calling piix_init+0x0/0x29 @ 1
initcall piix_init+0x0/0x29 returned 0 after 21 usecs
calling sch_pci_driver_init+0x0/0x1b @ 1
initcall sch_pci_driver_init+0x0/0x1b returned 0 after 35 usecs
calling mpiix_pci_driver_init+0x0/0x1b @ 1
initcall mpiix_pci_driver_init+0x0/0x1b returned 0 after 13 usecs
calling ata_generic_pci_driver_init+0x0/0x1b @ 1
initcall ata_generic_pci_driver_init+0x0/0x1b returned 0 after 26 usecs
calling net_olddevs_init+0x0/0x5b @ 1
initcall net_olddevs_init+0x0/0x5b returned 0 after 8 usecs
calling tun_init+0x0/0x8a @ 1
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
initcall tun_init+0x0/0x8a returned 0 after 206 usecs
calling e100_init_module+0x0/0x59 @ 1
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
initcall e100_init_module+0x0/0x59 returned 0 after 26 usecs
calling fusion_init+0x0/0xf4 @ 1
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
initcall fusion_init+0x0/0xf4 returned 0 after 13 usecs
calling mptspi_init+0x0/0xf0 @ 1
Fusion MPT SPI Host driver 3.04.20
initcall mptspi_init+0x0/0xf0 returned 0 after 35 usecs
calling mptsas_init+0x0/0x137 @ 1
Fusion MPT SAS Host driver 3.04.20
initcall mptsas_init+0x0/0x137 returned 0 after 13 usecs
calling ehci_hcd_init+0x0/0xc1 @ 1
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
initcall ehci_hcd_init+0x0/0xc1 returned 0 after 21 usecs
calling ehci_pci_init+0x0/0x67 @ 1
ehci-pci: EHCI PCI platform driver
initcall ehci_pci_init+0x0/0x67 returned 0 after 13 usecs
calling uhci_hcd_init+0x0/0x118 @ 1
uhci_hcd: USB Universal Host Controller Interface driver
initcall uhci_hcd_init+0x0/0x118 returned 0 after 17 usecs
calling xhci_hcd_init+0x0/0x15 @ 1
initcall xhci_hcd_init+0x0/0x15 returned 0 after 8 usecs
calling xhci_pci_init+0x0/0x44 @ 1
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.5.2-202.native xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 12 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.5.2-202.native xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
initcall xhci_pci_init+0x0/0x44 returned 0 after 11108 usecs
calling usb_storage_driver_init+0x0/0x30 @ 1
usbcore: registered new interface driver usb-storage
initcall usb_storage_driver_init+0x0/0x30 returned 0 after 13 usecs
calling i8042_init+0x0/0x3f0 @ 1
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
initcall i8042_init+0x0/0x3f0 returned 0 after 3436 usecs
calling evdev_init+0x0/0x12 @ 1
initcall evdev_init+0x0/0x12 returned 0 after 423 usecs
calling atkbd_init+0x0/0x27 @ 1
initcall atkbd_init+0x0/0x27 returned 0 after 13 usecs
calling cmos_init+0x0/0x6c @ 1
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
initcall cmos_init+0x0/0x6c returned 0 after 629 usecs
calling dw_i2c_driver_init+0x0/0x1b @ 1
initcall dw_i2c_driver_init+0x0/0x1b returned 0 after 9 usecs
calling acpi_power_meter_init+0x0/0x37 @ 1
initcall acpi_power_meter_init+0x0/0x37 returned 0 after 14 usecs
calling coretemp_init+0x0/0x79 @ 1
initcall coretemp_init+0x0/0x79 returned 0 after 212 usecs
calling powerclamp_init+0x0/0x22e @ 1
initcall powerclamp_init+0x0/0x22e returned 0 after 14 usecs
calling pkg_temp_thermal_init+0x0/0x157 @ 1
initcall pkg_temp_thermal_init+0x0/0x157 returned 0 after 97 usecs
calling raid0_init+0x0/0x12 @ 1
md: raid0 personality registered for level 0
initcall raid0_init+0x0/0x12 returned 0 after 4 usecs
calling raid_init+0x0/0x12 @ 1
md: raid1 personality registered for level 1
initcall raid_init+0x0/0x12 returned 0 after 4 usecs
calling raid_init+0x0/0x12 @ 1
md: raid10 personality registered for level 10
initcall raid_init+0x0/0x12 returned 0 after 4 usecs
calling dm_init+0x0/0x48 @ 1
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
initcall dm_init+0x0/0x48 returned 0 after 94 usecs
calling cpufreq_stats_init+0x0/0xcd @ 1
initcall cpufreq_stats_init+0x0/0xcd returned 0 after 8 usecs
calling cpufreq_gov_dbs_init+0x0/0x12 @ 1
initcall cpufreq_gov_dbs_init+0x0/0x12 returned 0 after 8 usecs
calling mmc_blk_init+0x0/0x82 @ 1
initcall mmc_blk_init+0x0/0x82 returned 0 after 5 usecs
calling sdhci_drv_init+0x0/0x20 @ 1
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
initcall sdhci_drv_init+0x0/0x20 returned 0 after 4 usecs
calling sdhci_driver_init+0x0/0x1b @ 1
initcall sdhci_driver_init+0x0/0x1b returned 0 after 10 usecs
calling sdhci_acpi_driver_init+0x0/0x14 @ 1
initcall sdhci_acpi_driver_init+0x0/0x14 returned 0 after 7 usecs
calling dmi_sysfs_init+0x0/0x9d @ 1
initcall dmi_sysfs_init+0x0/0x9d returned 0 after 167 usecs
calling efivars_sysfs_init+0x0/0x220 @ 1
EFI Variables Facility v0.08 2004-May-17
initcall efivars_sysfs_init+0x0/0x220 returned 0 after 3646 usecs
calling esrt_sysfs_init+0x0/0x346 @ 1
initcall esrt_sysfs_init+0x0/0x346 returned -38 after 4 usecs
calling efivars_pstore_init+0x0/0x9f @ 1
pstore: Registered efi as persistent store backend
initcall efivars_pstore_init+0x0/0x9f returned 0 after 5 usecs
calling hid_init+0x0/0x61 @ 1
hidraw: raw HID events driver (C) Jiri Kosina
initcall hid_init+0x0/0x61 returned 0 after 10 usecs
calling hid_generic_init+0x0/0x1b @ 1
initcall hid_generic_init+0x0/0x1b returned 0 after 6 usecs
calling lg_driver_init+0x0/0x1b @ 1
initcall lg_driver_init+0x0/0x1b returned 0 after 5 usecs
calling hid_init+0x0/0x52 @ 1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
initcall hid_init+0x0/0x52 returned 0 after 10 usecs
calling i2c_hid_driver_init+0x0/0x14 @ 1
initcall i2c_hid_driver_init+0x0/0x14 returned 0 after 6 usecs
calling powercap_init+0x0/0x271 @ 1
initcall powercap_init+0x0/0x271 returned 0 after 18 usecs
calling rapl_init+0x0/0x37b @ 1
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain dram
initcall rapl_init+0x0/0x37b returned 0 after 561 usecs
calling sock_diag_init+0x0/0x35 @ 1
initcall sock_diag_init+0x0/0x35 returned 0 after 23 usecs
calling llc_init+0x0/0x20 @ 1
initcall llc_init+0x0/0x20 returned 0 after 35 usecs
calling snap_init+0x0/0x38 @ 1
initcall snap_init+0x0/0x38 returned 0 after 13 usecs
calling blackhole_init+0x0/0x12 @ 1
initcall blackhole_init+0x0/0x12 returned 0 after 13 usecs
calling cbq_module_init+0x0/0x12 @ 1
initcall cbq_module_init+0x0/0x12 returned 0 after 17 usecs
calling multiq_module_init+0x0/0x12 @ 1
initcall multiq_module_init+0x0/0x12 returned 0 after 17 usecs
calling codel_module_init+0x0/0x12 @ 1
initcall codel_module_init+0x0/0x12 returned 0 after 8 usecs
calling fq_codel_module_init+0x0/0x12 @ 1
initcall fq_codel_module_init+0x0/0x12 returned 0 after 4 usecs
calling fq_module_init+0x0/0x55 @ 1
initcall fq_module_init+0x0/0x55 returned 0 after 5 usecs
calling init_cgroup_cls+0x0/0x12 @ 1
initcall init_cgroup_cls+0x0/0x12 returned 0 after 4 usecs
calling nfnetlink_init+0x0/0x67 @ 1
Netfilter messages via NETLINK v0.30.
initcall nfnetlink_init+0x0/0x67 returned 0 after 4 usecs
calling nfnl_acct_init+0x0/0x64 @ 1
nfnl_acct: registering with nfnetlink.
initcall nfnl_acct_init+0x0/0x64 returned 0 after 4 usecs
calling nfnetlink_queue_init+0x0/0x86 @ 1
initcall nfnetlink_queue_init+0x0/0x86 returned 0 after 7 usecs
calling nfnetlink_log_init+0x0/0x9a @ 1
initcall nfnetlink_log_init+0x0/0x9a returned 0 after 4 usecs
calling xt_init+0x0/0x107 @ 1
initcall xt_init+0x0/0x107 returned 0 after 4 usecs
calling tcpudp_mt_init+0x0/0x17 @ 1
initcall tcpudp_mt_init+0x0/0x17 returned 0 after 4 usecs
calling mark_mt_init+0x0/0x3e @ 1
initcall mark_mt_init+0x0/0x3e returned 0 after 4 usecs
calling gre_offload_init+0x0/0x17 @ 1
initcall gre_offload_init+0x0/0x17 returned 0 after 4 usecs
calling sysctl_ipv4_init+0x0/0x4c @ 1
initcall sysctl_ipv4_init+0x0/0x4c returned 0 after 32 usecs
calling ipip_init+0x0/0x87 @ 1
ipip: IPv4 over IPv4 tunneling driver
initcall ipip_init+0x0/0x87 returned 0 after 62 usecs
calling tunnel4_init+0x0/0x6c @ 1
initcall tunnel4_init+0x0/0x6c returned 0 after 4 usecs
calling ip_tables_init+0x0/0x9a @ 1
ip_tables: (C) 2000-2006 Netfilter Core Team
initcall ip_tables_init+0x0/0x9a returned 0 after 5 usecs
calling iptable_filter_init+0x0/0x4c @ 1
initcall iptable_filter_init+0x0/0x4c returned 0 after 7 usecs
calling reject_tg_init+0x0/0x12 @ 1
initcall reject_tg_init+0x0/0x12 returned 0 after 4 usecs
calling cubictcp_register+0x0/0x5a @ 1
initcall cubictcp_register+0x0/0x5a returned 0 after 4 usecs
calling xfrm_user_init+0x0/0x46 @ 1
Initializing XFRM netlink socket
initcall xfrm_user_init+0x0/0x46 returned 0 after 4 usecs
calling inet6_init+0x0/0x2f9 @ 1
NET: Registered protocol family 10
initcall inet6_init+0x0/0x2f9 returned 0 after 388 usecs
calling ip6_tables_init+0x0/0x9a @ 1
ip6_tables: (C) 2000-2006 Netfilter Core Team
initcall ip6_tables_init+0x0/0x9a returned 0 after 5 usecs
calling ip6table_filter_init+0x0/0x56 @ 1
initcall ip6table_filter_init+0x0/0x56 returned 0 after 7 usecs
calling reject_tg6_init+0x0/0x12 @ 1
initcall reject_tg6_init+0x0/0x12 returned 0 after 4 usecs
calling packet_init+0x0/0x42 @ 1
NET: Registered protocol family 17
initcall packet_init+0x0/0x42 returned 0 after 4 usecs
calling packet_diag_init+0x0/0x12 @ 1
initcall packet_diag_init+0x0/0x12 returned 0 after 4 usecs
calling br_init+0x0/0xe0 @ 1
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
initcall br_init+0x0/0xe0 returned 0 after 7 usecs
calling br_netfilter_init+0x0/0x82 @ 1
Bridge firewalling registered
initcall br_netfilter_init+0x0/0x82 returned 0 after 7 usecs
calling ebtables_init+0x0/0x4c @ 1
Ebtables v2.0 registered
initcall ebtables_init+0x0/0x4c returned 0 after 4 usecs
calling ebtable_broute_init+0x0/0x27 @ 1
initcall ebtable_broute_init+0x0/0x27 returned 0 after 6 usecs
calling ebtable_filter_init+0x0/0x3f @ 1
initcall ebtable_filter_init+0x0/0x3f returned 0 after 4 usecs
calling ebtable_nat_init+0x0/0x3f @ 1
initcall ebtable_nat_init+0x0/0x3f returned 0 after 4 usecs
calling ebt_802_3_init+0x0/0x12 @ 1
initcall ebt_802_3_init+0x0/0x12 returned 0 after 4 usecs
calling ebt_among_init+0x0/0x12 @ 1
initcall ebt_among_init+0x0/0x12 returned 0 after 4 usecs
calling ebt_arp_init+0x0/0x12 @ 1
initcall ebt_arp_init+0x0/0x12 returned 0 after 4 usecs
calling ebt_ip_init+0x0/0x12 @ 1
initcall ebt_ip_init+0x0/0x12 returned 0 after 4 usecs
calling ebt_ip6_init+0x0/0x12 @ 1
initcall ebt_ip6_init+0x0/0x12 returned 0 after 4 usecs
calling ebt_limit_init+0x0/0x12 @ 1
initcall ebt_limit_init+0x0/0x12 returned 0 after 4 usecs
calling ebt_mark_m_init+0x0/0x12 @ 1
initcall ebt_mark_m_init+0x0/0x12 returned 0 after 4 usecs
calling ebt_pkttype_init+0x0/0x12 @ 1
initcall ebt_pkttype_init+0x0/0x12 returned 0 after 4 usecs
calling ebt_stp_init+0x0/0x12 @ 1
initcall ebt_stp_init+0x0/0x12 returned 0 after 4 usecs
calling ebt_vlan_init+0x0/0x2e @ 1
initcall ebt_vlan_init+0x0/0x2e returned 0 after 4 usecs
calling ebt_arpreply_init+0x0/0x12 @ 1
initcall ebt_arpreply_init+0x0/0x12 returned 0 after 4 usecs
calling ebt_mark_init+0x0/0x12 @ 1
initcall ebt_mark_init+0x0/0x12 returned 0 after 4 usecs
calling ebt_dnat_init+0x0/0x12 @ 1
initcall ebt_dnat_init+0x0/0x12 returned 0 after 4 usecs
calling ebt_redirect_init+0x0/0x12 @ 1
initcall ebt_redirect_init+0x0/0x12 returned 0 after 4 usecs
calling ebt_snat_init+0x0/0x12 @ 1
initcall ebt_snat_init+0x0/0x12 returned 0 after 4 usecs
calling ebt_log_init+0x0/0x12 @ 1
initcall ebt_log_init+0x0/0x12 returned 0 after 4 usecs
calling ebt_nflog_init+0x0/0x12 @ 1
initcall ebt_nflog_init+0x0/0x12 returned 0 after 4 usecs
calling mcheck_init_device+0x0/0x16f @ 1
initcall mcheck_init_device+0x0/0x16f returned 0 after 185 usecs
calling tboot_late_init+0x0/0x278 @ 1
initcall tboot_late_init+0x0/0x278 returned 0 after 4 usecs
calling mcheck_late_init+0x0/0x5b @ 1
initcall mcheck_late_init+0x0/0x5b returned 0 after 4 usecs
calling severities_debugfs_init+0x0/0x3b @ 1
initcall severities_debugfs_init+0x0/0x3b returned 0 after 4 usecs
calling microcode_init+0x0/0x1ca @ 1
microcode: CPU0 sig=0x506e3, pf=0x2, revision=0x76
microcode: CPU1 sig=0x506e3, pf=0x2, revision=0x76
microcode: CPU2 sig=0x506e3, pf=0x2, revision=0x76
microcode: CPU3 sig=0x506e3, pf=0x2, revision=0x76
microcode: CPU4 sig=0x506e3, pf=0x2, revision=0x76
microcode: CPU5 sig=0x506e3, pf=0x2, revision=0x76
microcode: CPU6 sig=0x506e3, pf=0x2, revision=0x76
microcode: CPU7 sig=0x506e3, pf=0x2, revision=0x76
microcode: Microcode Update Driver: v2.01 , Peter Oruba
initcall microcode_init+0x0/0x1ca returned 0 after 264 usecs
calling hpet_insert_resource+0x0/0x24 @ 1
initcall hpet_insert_resource+0x0/0x24 returned 0 after 4 usecs
calling update_mp_table+0x0/0x423 @ 1
initcall update_mp_table+0x0/0x423 returned 0 after 4 usecs
calling lapic_insert_resource+0x0/0x40 @ 1
initcall lapic_insert_resource+0x0/0x40 returned 0 after 4 usecs
calling print_ICs+0x0/0x1a1 @ 1
initcall print_ICs+0x0/0x1a1 returned 0 after 4 usecs
calling pat_memtype_list_init+0x0/0x35 @ 1
initcall pat_memtype_list_init+0x0/0x35 returned 0 after 4 usecs
calling create_tlb_single_page_flush_ceiling+0x0/0x29 @ 1
initcall create_tlb_single_page_flush_ceiling+0x0/0x29 returned 0 after 4 usecs
calling aesni_init+0x0/0x136 @ 1
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
initcall aesni_init+0x0/0x136 returned 0 after 21767 usecs
calling init_oops_id+0x0/0x40 @ 1
initcall init_oops_id+0x0/0x40 returned 0 after 4 usecs
calling sched_init_debug+0x0/0x24 @ 1
initcall sched_init_debug+0x0/0x24 returned 0 after 4 usecs
calling pm_qos_power_init+0x0/0xa5 @ 1
initcall pm_qos_power_init+0x0/0xa5 returned 0 after 250 usecs
calling printk_late_init+0x0/0x65 @ 1
initcall printk_late_init+0x0/0x65 returned 0 after 4 usecs
calling tk_debug_sleep_time_init+0x0/0x3c @ 1
initcall tk_debug_sleep_time_init+0x0/0x3c returned 0 after 4 usecs
calling taskstats_init+0x0/0x6c @ 1
registered taskstats version 1
initcall taskstats_init+0x0/0x6c returned 0 after 40 usecs
calling clear_boot_tracer+0x0/0x2e @ 1
initcall clear_boot_tracer+0x0/0x2e returned 0 after 8 usecs
calling register_htab_map+0x0/0x14 @ 1
initcall register_htab_map+0x0/0x14 returned 0 after 8 usecs
calling register_perf_event_array_map+0x0/0x14 @ 1
initcall register_perf_event_array_map+0x0/0x14 returned 0 after 8 usecs
calling register_prog_array_map+0x0/0x14 @ 1
initcall register_prog_array_map+0x0/0x14 returned 0 after 4 usecs
calling register_array_map+0x0/0x14 @ 1
initcall register_array_map+0x0/0x14 returned 0 after 8 usecs
calling load_system_certificate_list+0x0/0xf7 @ 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 5792caff8838d6aec5387a18387db090bd0c7748'
initcall load_system_certificate_list+0x0/0xf7 returned 0 after 526 usecs
calling fault_around_debugfs+0x0/0x35 @ 1
initcall fault_around_debugfs+0x0/0x35 returned 0 after 4 usecs
calling max_swapfiles_check+0x0/0x8 @ 1
initcall max_swapfiles_check+0x0/0x8 returned 0 after 4 usecs
calling split_huge_pages_debugfs+0x0/0x35 @ 1
initcall split_huge_pages_debugfs+0x0/0x35 returned 0 after 4 usecs
calling check_early_ioremap_leak+0x0/0x42 @ 1
initcall check_early_ioremap_leak+0x0/0x42 returned 0 after 4 usecs
calling init_btrfs_fs+0x0/0x121 @ 1
Btrfs loaded
initcall init_btrfs_fs+0x0/0x121 returned 0 after 540 usecs
calling init_root_keyring+0x0/0xb @ 1
initcall init_root_keyring+0x0/0xb returned 0 after 15 usecs
calling prandom_reseed+0x0/0x40 @ 1
initcall prandom_reseed+0x0/0x40 returned 0 after 17 usecs
calling pci_resource_alignment_sysfs_init+0x0/0x22 @ 1
initcall pci_resource_alignment_sysfs_init+0x0/0x22 returned 0 after 4 usecs
calling pci_sysfs_init+0x0/0x4a @ 1
initcall pci_sysfs_init+0x0/0x4a returned 0 after 438 usecs
calling dmar_free_unused_resources+0x0/0xb3 @ 1
initcall dmar_free_unused_resources+0x0/0xb3 returned 0 after 4 usecs
calling deferred_probe_initcall+0x0/0x70 @ 1
initcall deferred_probe_initcall+0x0/0x70 returned 0 after 218 usecs
calling acpi_cpufreq_init+0x0/0x1ef @ 1
initcall acpi_cpufreq_init+0x0/0x1ef returned 0 after 1308 usecs
calling firmware_memmap_init+0x0/0x33 @ 1
initcall firmware_memmap_init+0x0/0x33 returned 0 after 36 usecs
calling efi_shutdown_init+0x0/0x31 @ 1
initcall efi_shutdown_init+0x0/0x31 returned 0 after 4 usecs
calling clk_debug_init+0x0/0x13e @ 1
initcall clk_debug_init+0x0/0x13e returned 0 after 5 usecs
calling pci_mmcfg_late_insert_resources+0x0/0x4c @ 1
initcall pci_mmcfg_late_insert_resources+0x0/0x4c returned 0 after 4 usecs
calling register_sk_filter_ops+0x0/0x2c @ 1
initcall register_sk_filter_ops+0x0/0x2c returned 0 after 4 usecs
calling tcp_congestion_default+0x0/0x12 @ 1
initcall tcp_congestion_default+0x0/0x12 returned 0 after 4 usecs
calling clk_disable_unused+0x0/0x170 @ 1
initcall clk_disable_unused+0x0/0x170 returned 0 after 4 usecs
calling init_default_flow_dissectors+0x0/0x38 @ 1
initcall init_default_flow_dissectors+0x0/0x38 returned 0 after 4 usecs
ata2: SATA link down (SStatus 4 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata4: SATA link down (SStatus 4 SControl 300)
ata6: SATA link down (SStatus 4 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link down (SStatus 4 SControl 300)
ata1.00: ATA-9: INTEL SSDSC2BW120A4, DC32, max UDMA/133
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2BW12 DC32 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
usb 1-9: new high-speed USB device number 2 using xhci_hcd
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 8:3.
devtmpfs: mounted
Freeing unused kernel memory: 1096K (ffffffff9c165000 - ffffffff9c277000)
Write protecting the kernel read-only data: 16384k
Freeing unused kernel memory: 368K (ffff88001b9a4000 - ffff88001ba00000)
Freeing unused kernel memory: 1928K (ffff88001be1e000 - ffff88001c000000)
random: systemd-bootcha urandom read with 15 bits of entropy available
systemd[1]: systemd 228 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR -SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running with unpopulated /etc.
systemd[1]: Initializing machine ID from random generator.
systemd[1]: display-manager.service: Cannot add dependency job, ignoring: Unit display-manager.service failed to load: No such file or directory.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on Journal Socket.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on udev Control Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Mounting Temporary Directory...
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Reached target Slices.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Listening on Network Service Netlink Socket.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Journal Service...
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Started Load/Save Random Seed.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Mounted Temporary Directory.
systemd[1]: Started Setup Virtual Console.
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Starting Create Static Device Nodes in /dev...
usb 1-9: New USB device found, idVendor=1a40, idProduct=0101
usb 1-9: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-9: Product: USB 2.0 Hub
hub 1-9:1.0: USB hub found
hub 1-9:1.0: 4 ports detected
systemd[1]: Started Journal Service.
systemd-journald[288]: Received request to flush runtime journal from PID 1
calling tpm_init+0x0/0x1000 [tpm] @ 330
initcall tpm_init+0x0/0x1000 [tpm] returned 0 after 6 usecs
calling init_tis+0x0/0x1000 [tpm_tis] @ 326
initcall init_tis+0x0/0x1000 [tpm_tis] returned 0 after 47 usecs
calling shpcd_init+0x0/0x1000 [shpchp] @ 320
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
initcall shpcd_init+0x0/0x1000 [shpchp] returned 0 after 17 usecs
calling serio_raw_drv_init+0x0/0x1000 [serio_raw] @ 319
initcall serio_raw_drv_init+0x0/0x1000 [serio_raw] returned 0 after 13 usecs
calling init_soundcore+0x0/0x1000 [soundcore] @ 321
initcall init_soundcore+0x0/0x1000 [soundcore] returned 0 after 30 usecs
calling e1000_init_module+0x0/0x1000 [e1000e] @ 317
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
calling psmouse_init+0x0/0x83 [psmouse] @ 319
e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
calling alsa_sound_init+0x0/0x82 [snd] @ 331
initcall alsa_sound_init+0x0/0x82 [snd] returned 0 after 172 usecs
initcall psmouse_init+0x0/0x83 [psmouse] returned 0 after 766 usecs
calling alsa_pcm_init+0x0/0x1000 [snd_pcm] @ 331
initcall alsa_pcm_init+0x0/0x1000 [snd_pcm] returned 0 after 4 usecs
calling hda_bus_init+0x0/0x12 [snd_hda_core] @ 331
initcall hda_bus_init+0x0/0x12 [snd_hda_core] returned 0 after 13 usecs
calling alsa_hwdep_init+0x0/0x1000 [snd_hwdep] @ 331
initcall alsa_hwdep_init+0x0/0x1000 [snd_hwdep] returned 0 after 8 usecs
calling azx_driver_init+0x0/0xfd4 [snd_hda_intel] @ 321
Adding 524284k swap on /dev/sda2. Priority:-1 extents:1 across:524284k SS
usb 1-9.4: new high-speed USB device number 3 using xhci_hcd
usb 1-9.4: New USB device found, idVendor=1a40, idProduct=0101
usb 1-9.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-9.4: Product: USB 2.0 Hub
hub 1-9.4:1.0: USB hub found
hub 1-9.4:1.0: 4 ports detected
tsc: Refined TSC clocksource calibration: 2903.988 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29dbfa58762, max_idle_ns: 440795236108 ns
clocksource: Switched to clocksource tsc
e1000e 0000:00:1f.6 eth0: registered PHC clock
e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) d0:50:99:9d:bc:4c
e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
initcall e1000_init_module+0x0/0x1000 [e1000e] returned 0 after 316721 usecs
snd_hda_intel 0000:01:00.1: Disabling MSI
initcall azx_driver_init+0x0/0xfd4 [snd_hda_intel] returned 0 after 302090 usecs
snd_hda_intel 0000:00:1f.3: failed to add i915 component master (-19)
e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
calling generic_driver_init+0x0/0x1000 [snd_hda_codec_generic] @ 342
initcall generic_driver_init+0x0/0x1000 [snd_hda_codec_generic] returned 0 after 7 usecs
calling realtek_driver_init+0x0/0x1000 [snd_hda_codec_realtek] @ 342
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
initcall realtek_driver_init+0x0/0x1000 [snd_hda_codec_realtek] returned 0 after 10680 usecs
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
usb 1-9.4.1: new full-speed USB device number 4 using xhci_hcd
calling hdmi_driver_init+0x0/0x1000 [snd_hda_codec_hdmi] @ 1420
initcall hdmi_driver_init+0x0/0x1000 [snd_hda_codec_hdmi] returned 0 after 28823 usecs
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
usb 1-9.4.1: New USB device found, idVendor=1532, idProduct=000c
usb 1-9.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-9.4.1: Product: Razer Lachesis
usb 1-9.4.1: Manufacturer: Razer
input: Razer Razer Lachesis as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.4/1-9.4.1/1-9.4.1:1.0/0003:1532:000C.0001/input/input13
hid-generic 0003:1532:000C.0001: input,hidraw0: USB HID v1.00 Mouse [Razer Razer Lachesis] on usb-0000:00:14.0-9.4.1/input0
input: Razer Razer Lachesis as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.4/1-9.4.1/1-9.4.1:1.1/0003:1532:000C.0002/input/input14
hid-generic 0003:1532:000C.0002: input,hidraw1: USB HID v1.00 Keyboard [Razer Razer Lachesis] on usb-0000:00:14.0-9.4.1/input1
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
usb 1-9.4.2: new low-speed USB device number 5 using xhci_hcd
usb 1-9.4.2: New USB device found, idVendor=04f2, idProduct=0833
usb 1-9.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-9.4.2: Product: USB Keyboard
usb 1-9.4.2: Manufacturer: CHICONY
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.4/1-9.4.2/1-9.4.2:1.0/0003:04F2:0833.0003/input/input17
hid-generic 0003:04F2:0833.0003: input,hidraw2: USB HID v1.11 Keyboard [CHICONY USB Keyboard] on usb-0000:00:14.0-9.4.2/input0
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.4/1-9.4.2/1-9.4.2:1.1/0003:04F2:0833.0004/input/input18
hid-generic 0003:04F2:0833.0004: input,hiddev0,hidraw3: USB HID v1.11 Device [CHICONY USB Keyboard] on usb-0000:00:14.0-9.4.2/input1
usb 1-9.4.3: new high-speed USB device number 6 using xhci_hcd
calling fuse_init+0x0/0x19c [fuse] @ 3655
fuse init (API version 7.24)
initcall fuse_init+0x0/0x19c [fuse] returned 0 after 48 usecs
usb 1-9.4.3: New USB device found, idVendor=1b1c, idProduct=1a03
usb 1-9.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-9.4.3: Product: Voyager 3.0
usb 1-9.4.3: Manufacturer: Corsair
usb 1-9.4.3: SerialNumber: 07085CA63B1B6331
usb-storage 1-9.4.3:1.0: USB Mass Storage device detected
scsi host6: usb-storage 1-9.4.3:1.0
random: nonblocking pool is initialized
scsi 6:0:0:0: Direct-Access Corsair Voyager 3.0 000A PQ: 0 ANSI: 6
sd 6:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:0:0: [sdb] 30965760 512-byte logical blocks: (15.9 GB/14.8 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 2b 00 00 08
sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
GPT:Primary header thinks Alt. header is not at the end of the disk.
GPT:4327423 != 30965759
GPT:Alternate GPT header not at the end of the disk.
GPT:4327423 != 30965759
GPT: Use GNU Parted to correct GPT errors.
sdb: sdb1 sdb2
sd 6:0:0:0: [sdb] Attached SCSI removable disk
e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready
cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation
usb 1-9.4.3: USB disconnect, device number 6